BlackGold Logo.png

Black Gold Pump & Supply, Inc. is an ISO 9001:2015 Certified and API Spec Q1 manufacturer that creates, manufactures, sells, and distributes a wide variety of API and non-API parts, products, and services for oil rigs and supporting equipment. 

CONTACT US

Black Gold Pump & Supply, Inc.
2459 Lewis Avenue Signal Hill, CA 90755

Phone: 562-595-4475


Fax: 562-595-9035

© 2019 Black Gold Pump & Supply Inc. 

TUBING PUMPS

  • Screws on to the tubing

  • Manufactured according to API 11AX specifications

  • Proprietary improvements

  • 100% made in the USA

  • Designed for better performance

The pump barrel serves as a section of the tubing string. The plunger and traveling valve are run in the well with the sucker rods. The standing valve can be one of two types;  fixed or retrievable. Tubing pumps are topically designed for more rugged well conditions such as higher volumes, deeper wells, and higher pressures. Maximum production can be expected with this type in relation to the size of tubing. Tubing pumps are ideal for deep horizontal well applications because there is no seating nipples to set or unseat the pumps, and sucker rod space out is user friendly.  

Fixed type tubing pumps standing valve assembly is attached below the pump barrel as part of the tubing string. A larger valve can be installed than with a retrievable type but the tubing must be pulled in order to repair it. When barrel repairs are required on a tubing pump, the entire tubing string must be pulled. This is a more expensive operation than a simple rod pulling job to repair and reinsert a rod pump.

The retrievable type standing valve rests in a cup-type or mechanical type seating nipple at the bottom of the tubing string. This can be removed with the sucker string by means of a puller pin assembly which is permanently attached to the lower end of the plunger.

  • The "TH" is an API all precision heavy wall metal barrel

  • The barrel is connected to the bottom of the tubing, becoming a part of the tubing string

  • The "TH" pump is made for higher volumes and pressures

  • Extensions can be added to both top and bottom of the barrel, with proper spacing will allow it to be a stroke through pump

  • Barrels available in harden and honed, brass, steel chrome ID, and NiCarb

Click here to use our Rod Pump calculator

Also, view our Pump Catalog for additional information.

Pumps are available in different lengths and material to address the different downhole challenges. Click here to contact us, and we can review your well.

TUBING ROD PUMP RANGE

TH PUMPS

TH Pumps are heavy wall barrel type tubing pumps suitable for deeper wells that produces sand, scale, paraffin and high level of gas. Recommended for deep, deviated well bores.


API Designation:
• 20-125-TH
• 20-150-TH
• 25-175-TH
• 25-200-TH

• 25-225-TH
• 30-275-TH

• 40-325-TH

• 40-375-TH

 

Click here to download spec sheet
 

TW PUMPS

TW Pumps are heavy wall barrel type tubing pumps suitable for deeper wells that produces sand, scale, paraffin and high level of gas. Recommended for deep, deviated well bores.


API Designation:
• 20-125-TW
• 20-150-TW
• 25-175-TW
• 25-200-TW

• 25-225-TW
• 30-275-TW

• 40-325-TW

• 40-375-TW

 

Click here to download spec sheet

PUMP RANGE

SPEC SHEETS

DOWNLOAD PDF

API 11AX INSERT PUMPS

RHAC Pumps 

RHBC Pumps 

RWAC Pumps 

RWBC Pumps

RWTC Pumps 

RXBC Pumps 

RSTC Pumps 

API 11AX TUBING PUMPS

THE Pumps 

THC Pumps 

SPECIALTY PUMPS

Stroke Through Plunger Pump

Gas Booster Pump

Barrel Length Plunger Pump

Black Gold Tubing Pump

Double Displacement Pump

Circle-A Pump